DTF Transfers by Size — Order Exactly the Size You Need
Sizes people actually order, with prices.
These are the placements that cover the large majority of apparel orders. Use them as a starting point rather than a rule — measure your actual garment if the design is close to a seam.
| Placement | Size | Printed area | Price each | × 25 copies |
|---|---|---|---|---|
| Left chest logo | 4" × 4" | 16 sq in | $0.40 | $9.96 |
| Sleeve print | 3" × 12" | 36 sq in | $0.90 | $22.41 |
| Youth front | 8" × 10" | 80 sq in | $1.99 | $49.80 |
| Adult front | 10" × 12" | 120 sq in | $2.99 | $74.70 |
| Full front / oversize | 12" × 16" | 192 sq in | $4.78 | $119.52 |
| Full back | 14" × 16" | 224 sq in | $5.58 | $139.44 |
Every figure above is $2.49 per 100 square inches — the same rate whether you order one or a thousand. Optional gang cutting adds $0.25 per copy.
Print sizes by what you are pressing.
| Garment | Placement | Typical width | Notes |
|---|---|---|---|
| Adult t-shirt (S–XL) | Full front | 10–12" | Centre roughly 3" below the collar seam. |
| Adult t-shirt (2XL–3XL) | Full front | 12–14" | Scale up or the print looks lost on a bigger garment. |
| Adult t-shirt | Left chest | 3–4" | About 3" down from the collar, 3" in from centre. |
| Adult t-shirt | Full back | 11–14" | Sits below the collar seam; watch the yoke on heavier tees. |
| Youth t-shirt | Full front | 7–8" | Going past ~9" runs into the sleeve seams. |
| Hoodie | Front (below pocket line) | 10–12" | Avoid crossing the pouch pocket seam — it will not press flat. |
| Hoodie | Left chest | 3–4" | Same placement logic as a tee. |
| Sleeve | Upper arm | 2–3.5" | Needs a small platen to press without creasing the body. |
| Cap / hat | Front panel | 2–4" | Requires a cap press or small platen for even contact. |
| Tote bag | Centre front | 8–12" | Firm pressure matters more than dwell time on canvas. |
| Apron | Chest panel | 6–9" | Keep clear of pocket seams and ties. |
22.75 inches wide, any length.
Our roll is 22.75 inches across. Width is the hard constraint; length effectively is not. That means a full back print, an oversized front, or a long vertical design down a sleeve or a leg are all straightforward — and it is also why gang sheets work well: you can run a very long sheet packed with small designs.
If your design is wider than 22.75 inches, the usual solutions are to rotate it, scale it down, or split it into two transfers pressed side by side. Tell us what you are trying to achieve and we will say which of those actually works for your design.
How to size your file correctly.
A 4000 × 4000 pixel file with a small logo in the middle is not a big print — it is a small print with a lot of empty space. Crop your file tight to the artwork before you upload it.
The width and height you enter is what gets printed and what gets charged. Enter the finished dimensions, not the pixel dimensions.
You want roughly 300 DPI at the final size — a 10-inch-wide print wants about 3000 pixels of width. Files are DPI-checked on upload and flagged if they will print soft.
Enter one dimension and let the other follow. Stretching a design to hit a number is obvious on a garment in a way it never looks on screen.
One design, several sizes.
The same logo often needs to go on a left chest, a sleeve and a full back — three different sizes of the same artwork. Rather than uploading it three times, create a version at each size and each one becomes its own line on the order, priced on its own area.
If you are ordering a lot of small pieces at mixed sizes, a gang sheet is usually the cheaper route — you pay for far less empty film between designs.
Sizing questions
- What is the biggest DTF transfer you can print?
- Up to 22.75 inches wide and effectively any length. That covers full back prints, oversized front prints and all-over designs — the width of the roll is the only hard limit.
- What size should a left chest logo be?
- Most run 3–4 inches wide. The usual placement is about 3 inches below the collar seam and roughly 3 inches in from the centre of the chest, though it is worth checking against the actual garment since youth and slim-fit cuts move that in.
- What size is a standard adult front print?
- Ten to twelve inches wide is the common range for an adult front. A 12" × 16" print is the usual "full front" and is about as large as most people go before it starts running into seams and hems.
- Can I order one design in several sizes?
- Yes. Create a version at each size you need and each becomes its own line on the order. That is the normal way to handle a logo that goes on a left chest, a sleeve and a full back.
- Do I need to add bleed or trim marks?
- No. Send the artwork at the size you want printed, with a transparent background and no crop marks. If you have ordered the cutting service we cut to the artwork, not to a box around it.
- What size transfer fits a youth shirt?
- Seven to eight inches wide is a safe adult-design-scaled-down size for youth garments. Going wider than about 9 inches on a youth tee usually pushes the print into the sleeve seams.
Also available
The main service page — turnaround, fabrics and how ordering works.
The rate, add-ons, shipping thresholds and worked examples.
The cheaper route when you are ordering many small designs at once.
Resolution, transparency, file types and a pre-flight checklist.
Set your size and see the price.
Enter the dimensions you want and the total appears as you type. Order before 2 PM ET and it prints today.
Any size up to 22.75" wide · No minimums · No setup fees